Skip to main content
Version: 32.0.0

a9s Redis Ressources Considerations

This document describes concerns and limitations to be considered when allocating resources for your a9s Redis plans.


It is possible to configure an a9s Redis service instance with RDB persistency enabled, which means that the Redis data on memory is written to the persistent disk.

Saving the content to the persistent storage is the approach used when backing up an a9s Redis service instance, and for this reason, your persistent disk size must be higher than your memory size. Keep in mind that a9s-parachute will stop the processes when persistent disk usage reaches 80% (default).

Reserved Memory

a9s Redis configures the maximum amount of memory Redis can use on a service instance, leaving a reserved amount for side processes (a9s Logstash, a9s Consul, a9s Backup Agent, and the OS).

maxmemory is configured as follows:

system_reserved_memory = min[10% of memory, 2GB]

total_reserverd_memory = system_reserved_memory + 256MB for the consul agent +
256MB for the a9s Backup Agent + 512MB for a9s Logstash

maxmemory = total_memory - total_reserverd_memory
maxmemory = max[150MB, maxmemory]

Reserved Disk Space

a9s Redis can be configured to use snapshots to persist data on the disk. If this is the case, then some disk space needs to be reserved.

Snapshots usually require an amount of disk space following the formula (1.2 * used memory) * 2. The (1.2 * used memory) formula part is directly linked with the relation between the amount of memory used by Redis and the snapshot file size produced after the snapshot operation. And, the * 2 second formula part is related to the way the Redis produce the snapshot file, It will keep the existing old snapshot file and create temporarily another file during the process. Therefore, it requires double of disk space available. E.g. a9s Redis instance uses 1GB of Memory, so the snapshot functionality would allocate around 2.4GB of disk space.

Sentinel port

The sentinel port is currently exposed in the service binding. The Sentinel port is currently hardcoded to 6357 + 20000. The templates in template-uploader-errand do not set the port based on the SPI value.

Cluster Deployment Update Strategy

When updating a cluster service instance, BOSH will update one node per time and only proceeds with updating the next node when the node that has been updated is UP, running, and synchronized with the cluster.

If the cluster service instance is healthy, and it means all nodes are UP, running, and synchronized, the process will proceed smoothly.

If the cluster service instance is not healthy, the process will fail because the update waits until the cluster is healthy. If it does not happen within the configurable timeout (cluster-update-node-timeout), the deployment will behave like it's set in the property (stop-cluster-update-on-failure).

The property stop-cluster-update-on-failure (default value: true), configures if the instance update should be aborted when the replication during the update does not work correctly. Setting this property to false causes that the replication error will be ignored and the deployment will continue. This will most probably cause data loss.

The property cluster-update-node-timeout (default value: 10), configures the maximal amount of time (in minutes) that a single Redis VM in a cluster instance update can take. The post-start script takes this value and if the runtime is bigger than the configured amount, it will take the above-described property and either fails or continues (based on the configuration).

Disable use_dns_adresses

The BOSH property use_dns_adresses should always be DISABLED when using a9s Redis. When use_dns_adresses is set to true, BOSH will use DNS hostnames instead of IP addresses in the service configuration. As we know, Redis Sentinel 3, 4, and 5 do not support this kind of configuration and although Redis Sentinel 6.2 supports this type of configuration, it will require further changes in the a9s Redis BOSH release. One of the side effects of using use_dns_adresses: true is the downtime when updating the a9s Redis deployment, but we are afraid that there may be more to that, so we recommend to disable this property when using a9s Redis.